TCL-8M | 4M

Features

High resolution and high contrast design

Possible to support 4M(16mm diagonal length) To 8M(23mm diagonal length)

Nearly zero distortion & high Telecentricity

Iris diaphragm for adjusting D.O.F Possible to customize according to customer requirement

It is highly recommended to the 2D&3D precise measurement applications like SPI(Solder Paste Inspection) & AOI(Auto Optical Inspection) in the SMT&PCB application. These lenses have designed for large format sensor which have wide F.O.V

For example, SPI system measures the solder paste height, and defect & short circuit on the PCB after printed the solder paste on the board. Besides, AOI system inspects the reference position and defect of each component by pattern matching for optical image.

It is also applied for LED components (die, wire bonding, chip size), Wafer inspection(IC chip, read, defect, etc.) applications.

Standard mount is F-mount but possible to change of the mount according to camera.
There are wide range magnifications so you can choose the suitable lens for various applications.




These lenses can get the high pixel resolution and wide F.O.V via large format telecentric lens SPO have wide range magnifications so you can choose the suitable lens for various applications.

TIP

Use for 4M Camera (5.5um*5.5um @ 2048 *2048) + TCL1.0X-65/D-4M-HR
- Pixel Resolution : 5.5um / F.O.V. : 11.26mm * 11.26mm

Use for 8M Camera ( 5.5um*5.5um @ 3296 *2472) + TCL1.0X-157I-8M-HR
- Pixel Resolution : 5.5um / F.O.V. : 18.12mm * 13.6mm

*Even if there is changed camera(4M to 8M), Pixel Resolution is maintained and then F.O.V will be widen!!!
It is possible to get more widen image than reference image by changing camera
Model Mag W.D
(mm)
Resolution
(um)
N.A F/# D.O.F
(mm)
Telecentricity
(Degree)
Optical
Distortion
(%)
Sensor Size(mm)
(Diagonal Length)
Mount Download
TCL0.315X-130I-8M-HR 0.315X 130 13.3 0.0252 6.25 2.8 0.03 0.03 8M(23mm) F PDF CAD
TCL0.318X-265I-8M-HR 0.318X 265 10.5 0.0318 5 2.2 0.03 0.08 8M(23mm) F PDF CAD
TCL0.348X-130I-8M-HR 0.348X 130 12.1 0.0278 6.25 2.3 0.03 0.04 8M(23mm) F PDF CAD
TCL0.348X-200I-8M-HR 0.348X 200 12 0.0289 6 2.2 0.03 0.02 8M(23mm) F PDF CAD
TCL0.385X-132I-8M-HR 0.385X 132 12.4 0.027 7.1 2.1 0.015 0.03 8M(23mm) F PDF CAD
TCL0.42X-132I-8M-HR 0.42X 132 5.4 0.0627 3.35 836um 0.023 0.03 8M(23mm) F PDF CAD
TCL0.42X-130I-8M 0.42X 130 16 0.021 10 2.5 0.03 0.1 8M(23mm) F PDF CAD
TCL0.49X-132I-8M-HR 0.49X 132 7.5 0.0446 5.5 1 0.03 0.05 8M(23mm) F PDF CAD
TCL0.5X-130I-8M-HR 0.5X 130 9.4 0.0357 7 1.2 0.03 0.05 8M(23mm) F PDF CAD
TCL0.56X-130I-8M 0.56X 130 12.7 0.028 10 1.4 0.03 0.06 8M(23mm) F PDF CAD
TCL0.58X-254I-8M-HR 0.58X 254 5.8 0.058 5 654um 0.03 0.08 8M(23mm) F PDF CAD
TCL0.6X-130I-8M-HR 0.6X 130 6.2 0.054 5.6 684um 0.03 0.06 8M(23mm) F PDF CAD
TCL0.6X-130I-8M 0.6X 130 11.6 0.029 10.4 1.3 0.23 0.1 8M(23mm) F PDF CAD
TCL0.6X-258I-8M-HR 0.6X 258 6 0.06 5 611um 0.03 0.03 8M(23mm) F PDF CAD
TCL0.64X-130I-8M-HR 0.64X 130 5.8 0.0576 5.56 597um 0.02 0.06 8M(23mm) F PDF CAD
TCL0.6X-310I-8M-HR 0.6X 310 7 0.048 6.25 764 0.03 0.08 8M(23mm) F PDF CAD
TCL0.7X-130I-8M-HR 0.7X 130 5.1 0.066 5.3 476um 0.03 0.05 8M(23mm) F PDF CAD
TCL0.7X-180I-15M 0.7X 180 5.7 0.0588 6 490um 0.04 0.03 15M(25mm) F PDF CAD
TCL1.0X-157I-8M-HR 1.0X 157 4.7 0.071 7 308um 0.03 0.06 8M(23mm) F PDF CAD
TCL2.0X-50D-8M-HR 2.0X 50 3 0.112 8.9 98um 0.03 0.04 8M(23mm) F PDF CAD
TCL2.0X-50-8M-HR 2.0X 50 3 0.112 8.9 98um 0.03 0.04 8M(23mm) F PDF CAD